I haven’t posted any pictures of the shop in a while so I thought I would! I’ve now officially been in this garage for a whole year, and wow things have changed a lot. I have most of what I need to make the things I enjoy making the most,...
I recently saw a really neat little table/desk accessory that I thought I’d recreate in my own way, and here it is! I used some scrap 1×1 cutoffs that I’ve been holding onto for a few years (you can never have too much scrap) and they were perfect for this...
This blog post will be getting an update in the next few days while I refinish the stands! Walnut and Poplar smartphone stands with about a 15 degree angle tilt. Fits all iPhone models.
I found some 20 year old IKEA chairs sitting next to a dumpster in rough condition and decided to clean them up a bit!
My friend Kevin Baker put the idea in my head that we needed a ping pong paddle rack for the office break room last fall, and I finally got around to putting one together a few weeks ago. Here are the pictures of the build! The Improvers at the Dallas...
This season’s shiny new Instant Challenge setup! I built three of these over the past week for Louisiana Destination Imagination’s “Super Saturday” Instant Challenge weekend. I’d say they were a success! I’ll do some more writing-up when I’m not so exhausted. Hope you like them. -Ryan See it in action...
Lots of new builds in the works right now. I can’t post pictures of everything I’m making quite yet, but I’m excited to get some more shop time after Christmas. My tools have been sadly underused lately. Here’s a sneak peek of a few pieces of a build I’m currently...
This is the finest thing I’ve ever built. The idea was inspired by a shelf of similar design that my great grandfather handmade and handed down to my grandfather. I grew up seeing it in his office, and I thought I’d make one of my own. It currently holds all the...
I will be updating this build soon, as they have been damaged and need to be resized!
These are the latest version of the heavy duty shelving, built for the new 10×20 Louisiana Destination Imagination storage shed. The design is exceedingly simple so hopefully the pictures speak for themselves! I decided to split up the original 2x8ft design and instead make two identical 2×4 foot shelves instead...
My brother and I chopped up a few boards to be sold at a craft fair this fall, and I thought I’d share a few pictures of the prep work I did on them. In the picture below, you can see some pine boards on top that were glued up...
I’ve been eyeing this project for a long time, and I finally made it happen! The openers pictured below were gifted to friends and family – I just wanted to enjoy making them and to teach myself how. I’ll be making more of these to sell in my store soon! First...
Pictured first is a lathe tool mount, made for the shop wall. This one is fitted for 1 inch diameter tools and made out of some oak scraps. Just cut about a 2-inch strip that will fit all of whatever you need to put in it (when you measure, be...
This project was a blast! I think they turned out well. I built these for my mother as a mother’s day gift one summer during college, and she was thrilled to have a nice place to plant and care for flowers on her front porch, where she didn’t have to...
My parents have some unfinished space next to a water heater in basically a closet at the top of their house. I wanted to provide them with some additional storage space for a few boxes that needed to get out of the way, so I came up with a solution...
This is obviously an adaptation of the other heavy duty wooden shelving I’ve built – this one was ridiculously tall, but allowed for the entire back wall of a third garage to be used as storage space.
We took some scrap pieces of wood and threw this rack together for my friend’s kayaks. It’s a little warped, but it works! We used an assortment of scrap 2×4, 1×2, 2×6, and 1/4 inch plywood pieces. First we measured the dimensions of each kayak to make sure we could...
I built these shelves for my sister’s family, and organized their garage to provide better access to its contents. These are about 6ft tall, 2ft deep and 8ft wide. I made the basic platforms quickly out of 2x4s and 1/4 inch plywood, and then tacked them up with 2×4 legs....
This coat rack is made out of a single reused 2×4 and a wooden dowel. This sits in my entryway, and I use it daily! So glad I made it – it’s one of my favorite builds. I’ll admit, it’s really ugly and I could have spent more time and...
